![]() ![]()
To Find your Raspberry Pi IP address, you can use Angry IP Scanner. Now, to access your Raspberry Pi, you need to find your Pi’s IP Address Finding Your Raspberry Pi IP Address Apply power to your Pi, and wait for about 2 minutes for the system to be ready. If you’re using the Raspberry Pi camera V2 module, make sure you’ve connected the camera in the right orientation as shown in the following image Ĥ. Connect an Ethernet cable – this is needed on the first boot ģ. Insert the microSD card in the Raspberry Pi Ģ. When the flash is completed, your microSD card is ready! Booting MotionEye on Raspberry Piįollow the next steps to boot MotionEyeOS for the first time on your Raspberry Pi.ġ. Select the image you’ve get previously, select your microSD card, and click Flash! With the microSD card formatted, and connected to your computer, open Etcher. VMEYE NOT WORKING INSTALLIf you don’t have Etcher installed, you can click here and install it on your computer. Then, you can use win32diskimager or Etcher, to write the image onto the SD card. If you’re using the Raspberry Pi 3, choose. With your microSD card connected to your computer, open the SD card Formatter application, and format your microSD card with the “overwrite format” option.Ĭhoose the right image for your device: MotionEyeOS releases page.Install the SD Card Formatter software. VMEYE NOT WORKING SOFTWARE
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |